SPEEDPRO COBRA CR2 HEXAGON Slip-on Aprilia RSV 4/R 1000 Factory, Mille

Super light V2A stainless steel in high gloss polished. May discolor over time due to heat development.

Titanium Finish: is a design effect to give the stainless steel a Titanium structure and look. Discolering might be possible under heat. Titanium Works Finish takes on a unique coloring after it goes through a heat cycle on the motorcycle that looks much like those titanium works components .
Contemporary Satin/matte finish - Uniform heat coloration - Increased fatigue strength - Increased scratch and stain resistance

Carbon: the super light material Carbon fiber reinforced plastic, also known as carbon fiber reinforced plastic (CFRP), also shortens carbon fiber, carbon or carbon, is a composite material in which carbon fibers are embedded in a plastic matrix.
The matrix serves to connect the fibers and to fill the spaces between them. The material epoxy resin is usually chosen as the matrix.

Carbon is only heat-resistant to a limited usage. *

Speed Products has therefore developed thermal insulation that protects the carbon from the inside against the hot exhaust gases.
We have christened this proprietary development RI Carbon: Reinforced Carbon.
However, for reasons of durability and of course considerable weight advantages, carbon is only recommended for racing.

For a durable use in normal road traffic there are better materials, such as the stainless steel( 0,7mm) developed by Speed Products, which is also very light.

 Note: Carbon is only conditionally heat resistant and loses its gloss with use. However, this does not affect the stability of the carbon material.

* * No holders/brackets can be welded to carbon shells and carbon muffler shells. A super light and very durable alternative are Speed Products stainless steel shells in Mattblack Ceramics in 0.7mm wall thickness.

* Carbon shells and carbon muffler shells cannot have laser logos on them. We use appropriate heat resistant decals/stickers and/or 3 D nameplates. For sizes, please refer to the corresponding options.
Again, a super light and very durable alternative are Speed Products stainless steel sleeves in Mattblack Ceramics in 0.7mm wall thickness, on which the laser logo can be applied. For sizes, please refer to the corresponding options.

V2A Stainless steel sanded, Stainless steel discolors golden-brown under the influence of heat in contrast to aluminum.

The material of the exhaust part, like manifolds, center pipes etc. are brushed matt. Scratches are less noticeable. The basic surface/color and texture of the material used does not change. Stainless steel discolors golden-brown under the influence of heat in contrast to aluminum.

 

Black Velvet
Ambient Cure Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Black Velvet has been designed to withstand extreme use
temperatures (1,800°F). This makes the coating ideal exhaust systems and components. Black Velvet Ambient Cure Ceramic Coatings maintain excellent adhesion even after
repeated thermal cycling. These coatings provide superior protection again corrosive environments and
thermal shock.

 

SPEEDPRO COBRA Laserlogo exclusive

Notes:
*Laserlogo, not possible on Carbon material

* with thin stainless steel, titanium or inconel material it might come to indentation of the sleeve material.
But this does not stress the strenghten .

* the maximal size of the Cobra Logo is: 90 x18mm, SP Logo : 36x 40mm