SPEEDPRO COBRA SP2 4in1 full system Road Legal/EEC/ABE homologated Ka, 1,002.18 $

Endcaps SP2

endcap SP2 0.00 $
MotoGP Kit - Grid - Cobra SP2 +102.22 $
Show description

The MGP Grid can easily be mounted and removed, but it can not be used with removed db killer.
Complete do-it-yourself kit with all parts. Please see pics above (scroll to the right side).

Sleeve length

sleeve length 400mm 0.00 $
sleeve length 350mm 0.00 $

sleeve material / surface finish

sleeve material stainless steel - titanium finish 0.00 $
Show description

Titanium Finish: is a design effect to give the stainless steel a Titanium structure and look. Discolering might be possible under heat. Titanium Works Finish takes on a unique coloring after it goes through a heat cycle on the motorcycle that looks much like those titanium works components . ?Contemporary Satin/matte finish ?Uniform heat coloration ?Increased fatigue strength ?Increased scratch and stain resistance
sleeve material stainless steel - matt black +102.22 $
Show description

Matt Black Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Matt Black has been designed to withstand extreme use temperatures (800°C). This makes the coating ideal exhaust systems and components. Matt Black Ambient Cure Ceramic Coatings maintain excellent adhesion even after repeated thermal cycling
sleeve material - carbon reinforced +102.22 $
Show description

Carbon: the super light material Carbon fiber reinforced plastic, also known as carbon fiber reinforced plastic (CFRP), also shortens carbon fiber, carbon or carbon, is a composite material in which carbon fibers are embedded in a plastic matrix.
The matrix serves to connect the fibers and to fill the spaces between them. The material epoxy resin is usually chosen as the matrix.

Carbon is only heat-resistant to a limited usage. *

Speed Products has therefore developed thermal insulation that protects the carbon from the inside against the hot exhaust gases.
We have christened this proprietary development RI Carbon: Reinforced Carbon.
However, for reasons of durability and of course considerable weight advantages, carbon is only recommended for racing.

For a durable use in normal road traffic there are better materials, such as the stainless steel( 0,7mm) developed by Speed Products, which is also very light.

Note: Carbon is only conditionally heat resistant and loses its gloss with use. However, this does not affect the stability of the carbon material.

* * No holders/brackets can be welded to carbon shells and carbon muffler shells. A super light and very durable alternative are Speed Products stainless steel shells in Mattblack Ceramics in 0.7mm wall thickness.

* Carbon shells and carbon muffler shells cannot have laser logos on them. We use appropriate heat resistant decals/stickers and/or 3 D nameplates. For sizes, please refer to the corresponding options.
Again, a super light and very durable alternative are Speed Products stainless steel sleeves in Mattblack Ceramics in 0.7mm wall thickness, on which the laser logo can be applied. For sizes, please refer to the corresponding options.
sleeve material stainless steel - titan Ceramics +102.22 $
Show description

Titan Ceramics Titan Ceramics is satin titanium Soft Touch Cermaics Coating.
Ambient Cure Ceramic Coating has been designed to protect both metal and nonmetal substrates.
Additionally, the Titan Ceramics has been designed to withstand extreme use temperatures (1,800°F).
This makes the coating ideal exhaust systems and components.
Titan Ceramics Ambient Cure Ceramic Coatings maintain excellent adhesion even after repeated thermal cycling.
These coatings provide superior protection again corrosive environments and thermal shock.
sleeve material stainless steel - Black Velvet Ceramics +132.90 $
Show description

Black Velvet
Ambient Cure Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Black Velvet has been designed to withstand extreme use
temperatures (1,800°F). This makes the coating ideal exhaust systems and components. Black Velvet Ambient Cure Ceramic Coatings maintain excellent adhesion even after
repeated thermal cycling. These coatings provide superior protection again corrosive environments and
thermal shock.

Clamp

clamp - V2A polished 0.00 $
Show description

Stainless Steel polished
clamp - V2A matt brushed 0.00 $
Show description

Stainless steel clamp matt brushed
clamp - V2A matt black 0.00 $
Show description

Stainless steel in matt black
clamp - V2A black velvet 0.00 $
Show description

Stainless steel clamp in Black Velvet matt. Many high performance coatings claim to be capable of operating at high temperatures. Most coatings, however, fail as temperatures exceed 1.000°F. All of our high temperature Ultra Performance Coatings are stable up to 1.100°C. Our high temperature line consists of two high quality formulations, the Ultra Performance Satin Metallic series. Available in several metallized finishes, these coatings will not only give an attractive look but also works as a perfect thermal barrier that increases performance and horsepower by increasing heat scavenging during the exhaust cycle. Our coatings have shown lower radiant temperature between 400-600°F. Performance Proven Hight Temp. Coating Heat stable up to 1.100°C Excellent Corrosion Protection Extreme Hardness Maximum Chemical Resistance Thermal Barrier Protection

linkpipes

linkpipe stainless steel - factory 0.00 $
Show description

V2A Stainless steel sanded, Stainless steel discolors golden-brown under the influence of heat in contrast to aluminum.
linkpipe stainless steel - brushed +71.54 $
Show description

The material of the exhaust part, like manifolds, center pipes etc. are brushed matt. Scratches are less noticeable. The basic surface/color and texture of the material used does not change. Stainless steel discolors golden-brown under the influence of heat in contrast to aluminum.
linkpipe stainless steel - titanium finish matt +81.76 $
Show description

Titanium Works Finish. A unique offering from Speed Products of Europe. Titanium Works Finish is not a coating, but a media blast finish using our own special recipe of ingredients. The result is a stainless steel exhaust that after it goes through a heat cycle on the motorcycle, takes on unique coloring that looks much like those works components our factory racers use.
linkpipe stainless steel - matt black +102.22 $
Show description

Matt Black Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Matt Black has been designed to withstand extreme use temperatures (800°C). This makes the coating ideal exhaust systems and components. Matt Black Ambient Cure Ceramic Coatings maintain excellent adhesion even after repeated thermal cycling.
linkpipe stainless steel - Titanium Ceramics +102.22 $
Show description

Titan Ceramics Ambient Cure Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Titan Ceramics has been designed to withstand extreme use temperatures (1,800°F). This makes the coating ideal exhaust systems and components. Titan Ceramics Ambient Cure Ceramic Coatings maintain excellent adhesion even after repeated thermal cycling. These coatings provide superior protection again corrosive environments and thermal shock.
linkpipe stainless steel - Black Velvet +132.90 $
Show description

Black Velvet
Ambient Cure Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Black Velvet has been designed to withstand extreme use
temperatures (1,800°F). This makes the coating ideal exhaust systems and components. Black Velvet Ambient Cure Ceramic Coatings maintain excellent adhesion even after
repeated thermal cycling. These coatings provide superior protection again corrosive environments and
thermal shock.

Header

stainless steel

downpipe / header stainless steel - factory 0.00 $
Show description

Made out of stainless steel factory look
downpipe / header stainless steel - matt brushed 0.00 $
downpipe / header stainless steel - titanium finish +153.35 $
Show description

Titanium Finish: is a design effect to give the stainless steel a Titanium structure and look. Discolering might be possible under heat.
downpipe / header stainless steel - Mattblack +204.49 $
Show description

Matt Black

Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Matt Black has been designed to withstand extreme use

temperatures (800°C). This makes the coating ideal exhaust systems and components. Matt Black Ambient Cure Ceramic Coatings maintain excellent adhesion even after

repeated thermal cycling.
downpipe / header stainless steel - Titan Ceramics Coating +306.76 $
Show description

Titan Ceramics Ambient Cure Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Titan Ceramics has been designed to withstand extreme use temperatures (1,800°F). This makes the coating ideal exhaust systems and components. Titan Ceramics Ambient Cure Ceramic Coatings maintain excellent adhesion even after repeated thermal cycling. These coatings provide superior protection again corrosive environments and thermal shock.
downpipe / header stainless steel - Black Velvet +306.76 $
Show description

Black Velvet
Ambient Cure Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Black Velvet has been designed to withstand extreme use
temperatures (1,800°F). This makes the coating ideal exhaust systems and components. Black Velvet Ambient Cure Ceramic Coatings maintain excellent adhesion even after
repeated thermal cycling. These coatings provide superior protection again corrosive environments and
thermal shock.

Decal Cobra

SPEEDPRO COBRA Decal 3D 0.00 $
Show description

SPEEDPRO COBRA - 3D Nameplate with 3 D Look.
- Aluminium made

Notes

* the apprx. size of the Cobra Logos are : 120x 30mm, SP Decal : 95 x67mm
SPEEDPRO COBRA - 3D nameplate +20.40 $
Show description

SPEEDPRO COBRA - 3D Nameplate with 3 D Look.
- Aluminium made

Notes

* the apprx. size of the Cobra Logos are : 120x 30mm, SP Decal : 95 x67mm
SPEEDPRO COBRA Laserlogo +51.08 $
Show description

SPEEDPRO COBRA Laserlogo exclusive

Notes:
*Laserlogo, not possible on Carbon material

* with thin stainless steel, titanium or inconel material it might come to indentation of the sleeve material.
But this does not stress the strenghten .

* the maximal size of the Cobra Logo is: 90 x18mm, SP Logo : 36x 40mm

Catalytic converter

no catalyst 0.00 $
catalyst EURO 2 * +81.76 $
Show description

Preis per Stk. pro Dämpfer Anmerkungen* Kat 200 CPSI *e1 Upgrades können nicht ohne Hauptartikel bestellt werden. Einzelne Kataylsatoren finden Sie unter der Rubrik Katalysatoren.
catalyst EURO 3 * +102.22 $
Show description

Preis per Stk. pro Dämpfer. Anmerkungen* Kat 3/400 CPSI oder 2x 200 CPSI, je nach Modell *e1 Upgrades können nicht ohne Hauptartikel bestellt werden. Einzelne Kataylsatoren finden Sie unter der Rubrik Katalysatoren.