SPEEDPRO COBRA SP2 Slip-on Race Kawasaki ZX-9 R Ninja

Item number: 82P-4032-348

Slip-on kit Race
Complete mounting kit including link pipe and all mounting parts, hangers.
The muffler has a diameter of 100mm.
Notes:
Exceptions:

Category: Cobra exhaust systems

Sleeve
starting from 352.48 $

Excluding 19% VAT (will be charged for customer within the EU European Union).

Available!
Sleeve length
  • Upgrade sleeve length from 250 to 200mm.
    This item cannot be ordered individually, only as an upgrade option (surcharge).
Endcaps SP2
Endcaps SP2
  • The MGP Grid can easily be mounted and removed, but it can not be used with removed db killer.
    Complete do-it-yourself kit with all parts. Please see pics above (scroll to the right side).
sleeve material / surface finish
sleeve material / surface finish

  • Titanium Finish: is a design effect to give the stainless steel a Titanium structure and look. Discolering might be possible under heat. Titanium Works Finish takes on a unique coloring after it goes through a heat cycle on the motorcycle that looks much like those titanium works components . ?Contemporary Satin/matte finish ?Uniform heat coloration ?Increased fatigue strength ?Increased scratch and stain resistance

  • Matt Black Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Matt Black has been designed to withstand extreme use temperatures (800°C). This makes the coating ideal exhaust systems and components. Matt Black Ambient Cure Ceramic Coatings maintain excellent adhesion even after repeated thermal cycling

  • Carbon: the super light material Carbon fiber reinforced plastic, also known as carbon fiber reinforced plastic (CFRP), also shortens carbon fiber, carbon or carbon, is a composite material in which carbon fibers are embedded in a plastic matrix.
    The matrix serves to connect the fibers and to fill the spaces between them. The material epoxy resin is usually chosen as the matrix.

    Carbon is only heat-resistant to a limited usage. *

    Speed Products has therefore developed thermal insulation that protects the carbon from the inside against the hot exhaust gases.
    We have christened this proprietary development RI Carbon: Reinforced Carbon.
    However, for reasons of durability and of course considerable weight advantages, carbon is only recommended for racing.

    For a durable use in normal road traffic there are better materials, such as the stainless steel( 0,7mm) developed by Speed Products, which is also very light.

     Note: Carbon is only conditionally heat resistant and loses its gloss with use. However, this does not affect the stability of the carbon material.

    * * No holders/brackets can be welded to carbon shells and carbon muffler shells. A super light and very durable alternative are Speed Products stainless steel shells in Mattblack Ceramics in 0.7mm wall thickness.

    * Carbon shells and carbon muffler shells cannot have laser logos on them. We use appropriate heat resistant decals/stickers and/or 3 D nameplates. For sizes, please refer to the corresponding options.
    Again, a super light and very durable alternative are Speed Products stainless steel sleeves in Mattblack Ceramics in 0.7mm wall thickness, on which the laser logo can be applied. For sizes, please refer to the corresponding options.

     

  • Titan Ceramics Titan Ceramics is satin titanium Soft Touch Cermaics Coating.
    Ambient Cure Ceramic Coating has been designed to protect both metal and nonmetal substrates.
    Additionally, the Titan Ceramics has been designed to withstand extreme use temperatures (1,800°F).
    This makes the coating ideal exhaust systems and components.
    Titan Ceramics Ambient Cure Ceramic Coatings maintain excellent adhesion even after repeated thermal cycling.
    These coatings provide superior protection again corrosive environments and thermal shock.

  • Black Velvet
    Ambient Cure Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Black Velvet has been designed to withstand extreme use
    temperatures (1,800°F). This makes the coating ideal exhaust systems and components. Black Velvet Ambient Cure Ceramic Coatings maintain excellent adhesion even after
    repeated thermal cycling. These coatings provide superior protection again corrosive environments and
    thermal shock.

optional Db Killer insert available
optional Db Killer insert available
  • The pics are only symbolic.
  • The pics are only symbolic.
  • The pics are only symbolic.
  • The pics are only symbolic.
  • The pics are only symbolic. Head: 51mm
Clamp
Clamp
  • Stainless Steel factory
  • Stainless steel clamp titanium finish
  • Stainless steel in matt black
  • Stainless steel clamp in Black Velvet matt. Many high performance coatings claim to be capable of operating at high temperatures. Most coatings, however, fail as temperatures exceed 1.000°F. All of our high temperature Ultra Performance Coatings are stable up to 1.100°C. Our high temperature line consists of two high quality formulations, the Ultra Performance Satin Metallic series. Available in several metallized finishes, these coatings will not only give an attractive look but also works as a perfect thermal barrier that increases performance and horsepower by increasing heat scavenging during the exhaust cycle. Our coatings have shown lower radiant temperature between 400-600°F. Performance Proven Hight Temp. Coating Heat stable up to 1.100°C Excellent Corrosion Protection Extreme Hardness Maximum Chemical Resistance Thermal Barrier Protection
linkpipes
linkpipes

  • V2A Stainless steel sanded, Stainless steel discolors golden-brown under the influence of heat in contrast to aluminum.

  • Titanium Works Finish. A unique offering from Speed Products of Europe. Titanium Works Finish is not a coating, but a media blast finish using our own special recipe of ingredients. The result is a stainless steel exhaust that after it goes through a heat cycle on the motorcycle, takes on unique coloring that looks much like those works components our factory racers use.
  • Matt Black Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Matt Black has been designed to withstand extreme use temperatures (800°C). This makes the coating ideal exhaust systems and components. Matt Black Ambient Cure Ceramic Coatings maintain excellent adhesion even after repeated thermal cycling.
  • Titan Ceramics Ambient Cure Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Titan Ceramics has been designed to withstand extreme use temperatures (1,800°F). This makes the coating ideal exhaust systems and components. Titan Ceramics Ambient Cure Ceramic Coatings maintain excellent adhesion even after repeated thermal cycling. These coatings provide superior protection again corrosive environments and thermal shock.

  • Black Velvet
    Ambient Cure Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Black Velvet has been designed to withstand extreme use
    temperatures (1,800°F). This makes the coating ideal exhaust systems and components. Black Velvet Ambient Cure Ceramic Coatings maintain excellent adhesion even after
    repeated thermal cycling. These coatings provide superior protection again corrosive environments and
    thermal shock.

     

Decal Cobra
Decal Cobra
  • SPEEDPRO COBRA - 3D Nameplate with 3 D Look.
    - Aluminium made


    Notes

    * the apprx. size of the Cobra Logos are : 120x 30mm, SP Decal : 95 x67mm



     

  • SPEEDPRO COBRA - 3D Nameplate with 3 D Look.
    - Aluminium made


    Notes

    * the apprx. size of the Cobra Logos are : 120x 30mm, SP Decal : 95 x67mm



     

  • SPEEDPRO COBRA Laserlogo exclusive

    Notes:
    *Laserlogo, not possible on Carbon material

    * with thin stainless steel, titanium or inconel material it might come to indentation of the sleeve material.
    But this does not stress the strenghten .

    * the maximal size of the Cobra Logo is: 90 x18mm, SP Logo : 36x 40mm




     

Your configuration
SPEEDPRO COBRA SP2 RACE Series

SPEEDPRO COBRA SP2 Series motorcycle exhaust systems are known for their quality and full sound.
The mufflers/silencers are available in different length, materials and shapes.

More features are:

- Made in Germany
- low weight
- super-light holder
- corrosion-resistant construction
- 3 years warranty
- full sound
- full power
Make: KAWASAKI
Notes & Exceptions: RCO RACE Series Performance development/ additional performance/ information on performance development Emmisions Warning CALIFORNIA "RACE SERIES" 50 State legal products 90-Day Limited Warranty
Exhaust series: Slip-on
Year: 1997 1996 1995 1994
Model: ZX-9 R Ninja

Please login first to add a tag.

This shop uses cookies - both for technical reasons and for improving your shopping experience. If you continue to use the shop, you consent to using of cookies.