Honda VTR 1000 SP2 Firestorm - Cobra Exhaust - Premium muffler and pi, 999.39 $

Sleeve length

sleeve length 400mm Dual 0.00 $
sleeve length 350mm Dual +139.34 $

sleeve material / surface finish

sleeve - V2A stainless steel - titanium finish 0.00 $
Show description

Titanium Finish: is a design effect to give the stainless steel a Titanium structure and look. Discolering might be possible under heat. Titanium Works Finish takes on a unique coloring after it goes through a heat cycle on the motorcycle that looks much like those titanium works components . •Contemporary Satin/matte finish •Uniform heat coloration •Increased fatigue strength •Increased scratch and stain resistance
sleeve - carbon reinforced - glossy +116.16 $
Show description

Carbon: the super light material Carbon fiber reinforced plastic, also known as carbon fiber reinforced plastic (CFRP), also shortens carbon fiber, carbon or carbon, is a composite material in which carbon fibers are embedded in a plastic matrix. The matrix serves to connect the fibers and to fill the spaces between them. The material epoxy resin is usually chosen as the matrix. Carbon is only heat-resistant to a limited extent. Speed Products has therefore developed thermal insulation that protects the carbon from the inside against the hot exhaust gases. We have christened this proprietary development RI Carbon: Reinforced Carbon. However, for reasons of durability and of course considerable weight advantages, carbon is only recommended for racing. For a durable use in normal road traffic there are better materials, such as the stainless steel( 0,7mm) developed by Speed Products, which is also very light.
sleeve - V2A stainless steel - matt black +116.16 $
Show description

Matt Black Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Matt Black has been designed to withstand extreme use temperatures (800°C). This makes the coating ideal exhaust systems and components. Matt Black Ambient Cure Ceramic Coatings maintain excellent adhesion even after repeated thermal cycling

Endcaps SPX

endcap SPX 0.00 $
SPX - MotoGP Kit - Grid +116.16 $
Show description

The MGP Grid can easily be removed. Complete do-it-yourself kit with all parts. Please see pics above (scroll to the right side).

Clamp

clamp Dual standard 0.00 $
clamp Dual matt brushed +46.43 $
clamp Dual matt black +69.67 $
clamp Dual black velvet +92.91 $

link pipe / mid pipe

linkpipe stainless steel - factory 0.00 $
Show description

Upgrade only.
linkpipes stainless steel - matt brushed +69.67 $
linkpipes stainless steel - titanium finish +95.32 $
linkpipes stainless steel - matt black +116.16 $
Show description

Ultra Performance Coating based on silicon in matt black.
linkpipe stainless steel - Titanium Ceramics +119.16 $
Show description

Titan Ceramics Ambient Cure Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Titan Ceramics has been designed to withstand extreme use temperatures (1,800°F). This makes the coating ideal exhaust systems and components. Titan Ceramics Ambient Cure Ceramic Coatings maintain excellent adhesion even after repeated thermal cycling. These coatings provide superior protection again corrosive environments and thermal shock.
linkpipes stainless steel - Black Velvet ceramic +151.02 $
Show description

Many high performance coatings claim to be capable of operating at high temperatures. Most coatings, however, fail as temperatures exceed 1.000°F. All of our high temperature Ultra Performance Coatings are stable up to 1.100°C. Our high temperature line consists of two high quality formulations, the Ultra Performance Satin Metallic series. Available in several metallized finishes, these coatings will not only give an attractive look but also works as a perfect thermal barrier that increases performance and horsepower by increasing heat scavenging during the exhaust cycle. Our coatings have shown lower radiant temperature between 400-600°F. Performance Proven Hight Temp. Coating Heat stable up to 1.100°C Excellent Corrosion Protection Extreme Hardness Maximum Chemical Resistance Thermal Barrier Protection

Decal Cobra

SPEEDPRO COBRA Decal 3D 0.00 $
Show description

heat resistant
SPEEDPRO COBRA 3D Nameplate +23.18 $
Show description

SPEEDPRO COBRA - 3D Nietenschild - wunderschönes geschliffenes Aluminium im 3D Look
SPEEDPRO COBRA Laserlogo +58.05 $
Show description

SPEEDPRO COBRA Laserlogo exclusiv, edel, einzigartig!