SPEEDPRO COBRA SP2 4in2 full system Road Legal/EEC/ABE homologated Yamaha V-MAX

Item number: 8P2-2011-748

The full system includes the muffler, link pipe and header/down pipes.

More features are:
- full and deep sound
- optimized for your bike
- less weight
- high quality materials
- DB Killer
- Made in Germany

Category: V-Max -2001

starting from 1,220.50 $

Excluding 19% VAT (will be charged for customer within the EU European Union).

Available!
Due to the high volume of orders and the effects of the pandemic, delivery times may be longer.
Sleeve length
  • *Shorty Upgrade auf kürzere Mantellänge von Standard Länge 400mm auf 350mm
sleeve material / surface finish
sleeve material / surface finish

  • Titanium Finish: is a design effect to give the stainless steel a Titanium structure and look. Discolering might be possible under heat. Titanium Works Finish takes on a unique coloring after it goes through a heat cycle on the motorcycle that looks much like those titanium works components . •Contemporary Satin/matte finish •Uniform heat coloration •Increased fatigue strength •Increased scratch and stain resistance

  • Carbon: the super light material Carbon fiber reinforced plastic, also known as carbon fiber reinforced plastic (CFRP), also shortens carbon fiber, carbon or carbon, is a composite material in which carbon fibers are embedded in a plastic matrix.
    The matrix serves to connect the fibers and to fill the spaces between them. The material epoxy resin is usually chosen as the matrix.

    Carbon is only heat-resistant to a limited usage. *

    Speed Products has therefore developed thermal insulation that protects the carbon from the inside against the hot exhaust gases.
    We have christened this proprietary development RI Carbon: Reinforced Carbon.
    However, for reasons of durability and of course considerable weight advantages, carbon is only recommended for racing.

    For a durable use in normal road traffic there are better materials, such as the stainless steel( 0,7mm) developed by Speed Products, which is also very light.

     Note: Carbon is only conditionally heat resistant and loses its gloss with use. However, this does not affect the stability of the carbon material.

    * * No holders/brackets can be welded to carbon shells and carbon muffler shells. A super light and very durable alternative are Speed Products stainless steel shells in Mattblack Ceramics in 0.7mm wall thickness.

    * Carbon shells and carbon muffler shells cannot have laser logos on them. We use appropriate heat resistant decals/stickers and/or 3 D nameplates. For sizes, please refer to the corresponding options.
    Again, a super light and very durable alternative are Speed Products stainless steel sleeves in Mattblack Ceramics in 0.7mm wall thickness, on which the laser logo can be applied. For sizes, please refer to the corresponding options.

     

  • Matt Black Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Matt Black has been designed to withstand extreme use temperatures (800°C). This makes the coating ideal exhaust systems and components. Matt Black Ambient Cure Ceramic Coatings maintain excellent adhesion even after repeated thermal cycling

  • Platinum Ceramics

     

    Platinum Ceramics is satin platinum Soft Touch Ceramics Coating.

    Ambient Cure Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Platinum Ceramics has been designed to withstand extreme use temperatures (800°C). This makes the coating ideal exhaust systems and components. Platinum Ceramics Ambient Cure Ceramic Coatings maintain excellent adhesion even after repeated thermal cycling. These coatings provide superior protection again corrosive environments and

    thermal shock.
  • Titan Ceramics Titan Ceramics is satin titanium Soft Touch Cermaics Coating.
    Ambient Cure Ceramic Coating has been designed to protect both metal and nonmetal substrates.
    Additionally, the Titan Ceramics has been designed to withstand extreme use temperatures (1,800°F).
    This makes the coating ideal exhaust systems and components.
    Titan Ceramics Ambient Cure Ceramic Coatings maintain excellent adhesion even after repeated thermal cycling.
    These coatings provide superior protection again corrosive environments and thermal shock.

  • Black Velvet
    Ambient Cure Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Black Velvet has been designed to withstand extreme use
    temperatures (1,800°F). This makes the coating ideal exhaust systems and components. Black Velvet Ambient Cure Ceramic Coatings maintain excellent adhesion even after
    repeated thermal cycling. These coatings provide superior protection again corrosive environments and
    thermal shock.

Clamp
Clamp
  • Stainless Steel factory
link pipe / mid pipe
link pipe / mid pipe
  • Upgrade only.
  • Ultra Performance Coating based on silicon in matt black.
  • Titan Ceramics Ambient Cure Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Titan Ceramics has been designed to withstand extreme use temperatures (1,800°F). This makes the coating ideal exhaust systems and components. Titan Ceramics Ambient Cure Ceramic Coatings maintain excellent adhesion even after repeated thermal cycling. These coatings provide superior protection again corrosive environments and thermal shock.
  • Many high performance coatings claim to be capable of operating at high temperatures. Most coatings, however, fail as temperatures exceed 1.000°F. All of our high temperature Ultra Performance Coatings are stable up to 1.100°C. Our high temperature line consists of two high quality formulations, the Ultra Performance Satin Metallic series. Available in several metallized finishes, these coatings will not only give an attractive look but also works as a perfect thermal barrier that increases performance and horsepower by increasing heat scavenging during the exhaust cycle. Our coatings have shown lower radiant temperature between 400-600°F. Performance Proven Hight Temp. Coating Heat stable up to 1.100°C Excellent Corrosion Protection Extreme Hardness Maximum Chemical Resistance Thermal Barrier Protection
Decal Cobra
Decal Cobra
  • SPEEDPRO COBRA - 3D Nameplate with 3 D Look.
    - Aluminium made


    Notes

    * the apprx. size of the Cobra Logos are : 120x 30mm, SP Decal : 95 x67mm



     

  • SPEEDPRO COBRA - 3D Nameplate with 3 D Look.
    - Aluminium made


    Notes

    * the apprx. size of the Cobra Logos are : 120x 30mm, SP Decal : 95 x67mm



     

  • SPEEDPRO COBRA Laserlogo exclusive

    Notes:
    *Laserlogo, not possible on Carbon material

    * with thin stainless steel, titanium or inconel material it might come to indentation of the sleeve material.
    But this does not stress the strenghten .

    * the maximal size of the Cobra Logo is: 90 x18mm, SP Logo : 36x 40mm




     

Header

stainless steel

Header
  • Made out of stainless steel factory look
  • Titanium Finish: is a design effect to give the stainless steel a Titanium structure and look. Discolering might be possible under heat.

  • Matt Black

    Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Matt Black has been designed to withstand extreme use

    temperatures (800°C). This makes the coating ideal exhaust systems and components. Matt Black Ambient Cure Ceramic Coatings maintain excellent adhesion even after

    repeated thermal cycling.

  • Titan Ceramics Ambient Cure Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Titan Ceramics has been designed to withstand extreme use temperatures (1,800°F). This makes the coating ideal exhaust systems and components. Titan Ceramics Ambient Cure Ceramic Coatings maintain excellent adhesion even after repeated thermal cycling. These coatings provide superior protection again corrosive environments and thermal shock.

  • Black Velvet
    Ambient Cure Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Black Velvet has been designed to withstand extreme use
    temperatures (1,800°F). This makes the coating ideal exhaust systems and components. Black Velvet Ambient Cure Ceramic Coatings maintain excellent adhesion even after
    repeated thermal cycling. These coatings provide superior protection again corrosive environments and
    thermal shock.

     

Endcaps SP2
Endcaps SP2
  • The MGP Grid can easily be mounted and removed, but it can not be used with removed db killer.
    Complete do-it-yourself kit with all parts. Please see pics above (scroll to the right side).
Your configuration
SPEEDPRO COBRA SP2

SPEEDPRO COBRA SP2 motorcycle exhaust systems are known for their quality and full sound.
The mufflers/silencers are available in different length, materials and shapes.

More features are:

- Made in Germany
- low weight
- removable DB Killer
- super-light holder
- corrosion-resistant construction
- 2 years warranty
- full sound
Make: YAMAHA
: *2011 *3062/3262/3362/3462/3282
Exhaust series: Fullsystem 4 in 2
Model: V-Max
Year: 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 1986 1985

Please login first to add a tag.

This shop uses cookies - both for technical reasons and for improving your shopping experience. If you continue to use the shop, you consent to using of cookies.