SPEEDPRO COBRA SC3 Black Series Slip-on dual Road Legal/EEC/ABE homologated Suzuki GSX-R 1000 K9 - L0 - L1 - Z1

The Ultra Performance Satin Metallics are not comparable to conventional silicon products. Our ceramic coatings, heatresisting up to approx. 1100 °C, offer an optimal flex together with a hard and abrasion-resistant surface. There is no scaling at constant high operating temperatures and there is no crack formation or detach under extreme temperature fluctuation.

Upgrade only.

Ultra Performance Coating based on silicon in matt black.

Titan Ceramics Ambient Cure Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Titan Ceramics has been designed to withstand extreme use temperatures (1,800°F). This makes the coating ideal exhaust systems and components. Titan Ceramics Ambient Cure Ceramic Coatings maintain excellent adhesion even after repeated thermal cycling. These coatings provide superior protection again corrosive environments and thermal shock.

Many high performance coatings claim to be capable of operating at high temperatures. Most coatings, however, fail as temperatures exceed 1.000°F. All of our high temperature Ultra Performance Coatings are stable up to 1.100°C. Our high temperature line consists of two high quality formulations, the Ultra Performance Satin Metallic series. Available in several metallized finishes, these coatings will not only give an attractive look but also works as a perfect thermal barrier that increases performance and horsepower by increasing heat scavenging during the exhaust cycle. Our coatings have shown lower radiant temperature between 400-600°F. Performance Proven Hight Temp. Coating Heat stable up to 1.100°C Excellent Corrosion Protection Extreme Hardness Maximum Chemical Resistance Thermal Barrier Protection

SPEEDPRO COBRA - 3D Nameplate with 3 D Look.
- Aluminium made


Notes

* the apprx. size of the Cobra Logos are : 120x 30mm, SP Decal : 95 x67mm

 

SPEEDPRO COBRA - 3D Nameplate with 3 D Look.
- Aluminium made


Notes

* the apprx. size of the Cobra Logos are : 120x 30mm, SP Decal : 95 x67mm

 

SPEEDPRO COBRA Laserlogo exclusive

Notes:
*Laserlogo, not possible on Carbon material

* with thin stainless steel, titanium or inconel material it might come to indentation of the sleeve material.
But this does not stress the strenghten .

* the maximal size of the Cobra Logo is: 90 x18mm, SP Logo : 36x 40mm