SPEEDPRO COBRA CS1R Slip-on

Item number: 811-6102-34

The slip-on exhaust systems contain the muffler with link pipe, mounting material and the DB Killer.

- handmade Made in Germany
- quick and easy assembly
- deep sound
- round shape
- conical inlet and outlet
- 106mm diameter of the muffler
- performance
- Premium Quality

Category: Diavel

starting from 410.87 $

Excluding 19% VAT (will be charged for customer within the EU European Union).

Available!

Shipping time: 10 - 11 workdays

Sleeve length
sleeve material/surface finish

  • matt brushed
    material stainless steel or aluminium

     

    This item cannot be ordered individually, only as an upgrade option (surcharge).

  • Titanium Finish: is a design effect to give the stainless steel a Titanium structure and look. Discolering might be possible under heat. Titanium Works Finish takes on a unique coloring after it goes through a heat cycle on the motorcycle that looks much like those titanium works components . •Contemporary Satin/matte finish •Uniform heat coloration •Increased fatigue strength •Increased scratch and stain resistance

  • Carbon: the super light material Carbon fiber reinforced plastic, also known as carbon fiber reinforced plastic (CFRP), also shortens carbon fiber, carbon or carbon, is a composite material in which carbon fibers are embedded in a plastic matrix. The matrix serves to connect the fibers and to fill the spaces between them. The material epoxy resin is usually chosen as the matrix. Carbon is only heat-resistant to a limited extent. Speed Products has therefore developed thermal insulation that protects the carbon from the inside against the hot exhaust gases. We have christened this proprietary development RI Carbon: Reinforced Carbon. However, for reasons of durability and of course considerable weight advantages, carbon is only recommended for racing. For a durable use in normal road traffic there are better materials, such as the stainless steel( 0,7mm) developed by Speed Products, which is also very light.

  • Platinum Ceramics

     

    Platinum Ceramics is satin platinum Soft Touch Ceramics Coating.

    Ambient Cure Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Platinum Ceramics has been designed to withstand extreme use temperatures (800°C). This makes the coating ideal exhaust systems and components. Platinum Ceramics Ambient Cure Ceramic Coatings maintain excellent adhesion even after repeated thermal cycling. These coatings provide superior protection again corrosive environments and

    thermal shock.

  • Black Velvet
    Ambient Cure Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Black Velvet has been designed to withstand extreme use
    temperatures (1,800°F). This makes the coating ideal exhaust systems and components. Black Velvet Ambient Cure Ceramic Coatings maintain excellent adhesion even after
    repeated thermal cycling. These coatings provide superior protection again corrosive environments and
    thermal shock.

Endcaps CS1R
Endcaps CS1R
  • The MGP Grid can easily be mounted and removed, but it can not be used with removed db killer.
    Complete do-it-yourself kit with all parts. Please see pics above (scroll to the right side).
Clamp
Clamp
  • Stainless Steel polished
  • Stainless steel clamp matt brushed
  • Stainless steel in matt black
  • Stainless steel clamp in Black Velvet matt. Many high performance coatings claim to be capable of operating at high temperatures. Most coatings, however, fail as temperatures exceed 1.000°F. All of our high temperature Ultra Performance Coatings are stable up to 1.100°C. Our high temperature line consists of two high quality formulations, the Ultra Performance Satin Metallic series. Available in several metallized finishes, these coatings will not only give an attractive look but also works as a perfect thermal barrier that increases performance and horsepower by increasing heat scavenging during the exhaust cycle. Our coatings have shown lower radiant temperature between 400-600°F. Performance Proven Hight Temp. Coating Heat stable up to 1.100°C Excellent Corrosion Protection Extreme Hardness Maximum Chemical Resistance Thermal Barrier Protection
inlet cap
inlet cap
Reinforced band
Reinforced band
linkpipes
linkpipes

  • V2A Stainless steel sanded, Stainless steel discolors golden-brown under the influence of heat in contrast to aluminum.

  • The material of the exhaust part, like manifolds, center pipes etc. are brushed matt. Scratches are less noticeable. The basic surface/color and texture of the material used does not change. Stainless steel discolors golden-brown under the influence of heat in contrast to aluminum.

     

  • Titanium Works Finish. A unique offering from Speed Products of Europe. Titanium Works Finish is not a coating, but a media blast finish using our own special recipe of ingredients. The result is a stainless steel exhaust that after it goes through a heat cycle on the motorcycle, takes on unique coloring that looks much like those works components our factory racers use.
  • Matt Black Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Matt Black has been designed to withstand extreme use temperatures (800°C). This makes the coating ideal exhaust systems and components. Matt Black Ambient Cure Ceramic Coatings maintain excellent adhesion even after repeated thermal cycling.
  • Titan Ceramics Ambient Cure Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Titan Ceramics has been designed to withstand extreme use temperatures (1,800°F). This makes the coating ideal exhaust systems and components. Titan Ceramics Ambient Cure Ceramic Coatings maintain excellent adhesion even after repeated thermal cycling. These coatings provide superior protection again corrosive environments and thermal shock.

  • Black Velvet
    Ambient Cure Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Black Velvet has been designed to withstand extreme use
    temperatures (1,800°F). This makes the coating ideal exhaust systems and components. Black Velvet Ambient Cure Ceramic Coatings maintain excellent adhesion even after
    repeated thermal cycling. These coatings provide superior protection again corrosive environments and
    thermal shock.

     

Decal Cobra
Decal Cobra
  • heat resistant
  • SPEEDPRO COBRA - 3D Nietenschild - wunderschönes geschliffenes Aluminium im 3D Look

  • SPEEDPRO COBRA Laserlogo exclusiv, edel, einzigartig!


    Anmerkungen:
    *Laserlogo geht nicht auf Carbon^

    * Bei dünnem Material wie 1mm oder düneres Edelstahblech- und Rohr und/oder Titanrohr kann es zu leichten Einwölbungen beim Lasern
    Das beieinträchtig nicht die Stabilität des Materials.



     
Your configuration
SPEEDPRO COBRA CS1R

SPEEDPRO COBRA CS1R Series motorcycle exhaust systems are known for their quality and full sound.
The mufflers/silencers are available in different length, materials and shapes.

More features are:

- Made in Germany
- low weight
- removable DB Killer
- super-light holder
- corrosion-resistant construction
- 2 years warranty
- full sound
- 104mm diameter
Brand: DUCATI
Model: Diavel
Notes & Exceptions: RCO RACE Series *a1/*e1 Emmisions Warning CALIFORNIA "RACE SERIES" 50 State legal products J2825 Sound Compliant
Year: 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011
Exhaust series: Slip-on
Remarks: *12 *45

Please login first to add a tag.

This product consists of
Mittelrohr Standard SLO Diavel BJ: 2011-XXXX

1 x Mittelrohr Standard SLO Diavel BJ: 2011-XXXX

This shop uses cookies - both for technical reasons and for improving your shopping experience. If you continue to use the shop, you consent to using of cookies.