link-pipes Slip-on
Homepage
Product range motorcycle exhaust
Spare parts
center tubes - connecting tubes
link-pipes Slip-on
Mittelrohr Standard SLO CBR1000RR Fireblade 08- SC59

Additional contact mail (leave blank)*

I totally agree to receive nothing*

Mittelrohr Standard SLO CBR1000RR Fireblade 08- SC59

Illustration exemplary

Mittelrohr Standard SLO CBR1000RR Fireblade 08- SC59

SKU: 051-1318-440
Category: link-pipes Slip-on

Bj., Typ und genaues Fahrzeug angeben!! Dämpferanschluß 53mm. Anschlussmaß 54mm. 1318 Standard LIK

Mittelrohr Variante: MGP Mittelrohr+ 44.85 $

Standard Mittelrohr

from

179.55 $

excl. 19% VAT (will be charged for customer within the EU European Union).

Available!
Delivery time: 0 Workdays (Other countries)

This item has variations. Please select the requested variation.

Configure

Production according to customer specifications

Our exhaust systems are manufactured according to customer requirements and customer specifications. They are not stock items (stock items are marked accordingly and cannot be adapted, changed or configured), but are manufactured individually according to customer requirements within the production possibilities.
Hierzu gilt: nach § 312d Abs. 1 Nr. 1 BGB besteht ein Widerrufsrecht nicht bei Fernabsatzverträgen zur Lieferung von Waren, die nach Kundenspezifikation angefertigt werden. Lesen Sie hierzu auch weitere Angaben zum Widerrufsrecht und zur AGB. Da Auspuffanlagen aber handgefertigt werden, kann es bei bestimmten Anlagen zu Lieferverzögerungen kommen. Schalldämpfer, Krümmer und Auspuffanlagen sind jedoch keine Massenproduktionsware, sondern werden in liebevoller Handarbeit von Fachleuten nach Ihren Wünschen und Spezifikationen geschweißt, poliert, hergestellt und veredelt. We make every effort to keep delivery times as short as possible.
All important information can be found on the left under further customer information.

Configure your article

Please select only one component.

stainless steel factory style 0.00 $

Quantity: 1

Surface stainless steel polished +89.75 $

polished stainless steel * stainless steel will blue and change the color due to heat gases. * stainless steel must be repolished from time to time

Quantity: 1

sleeve material/surface finish: Titanium Finish

sleeve material - V2A titanium finish +89.75 $

V2A stainless steel surface titanium finish

Quantity: 1

sleeve material - V2A matt black +89.75 $

V2A stainless steel matt black

Quantity: 1

sleeve material - V2A Black Velvet ceramic +179.55 $

V2A stainless steel The Ultra Performance Satin Metallics are not comparable to conventional silicon products. Our ceramic coatings, heatresisting up to approx. 1100 °C, offer an optimal flex together with a hard and abrasion-resistant surface. There is no scaling at constant high operating temperatures and there is no crack formation or detach under extreme temperature fluctuation.

Quantity: 1

Please select only one component.

sleeve aluminium, sleeve material/surface finish: matt black 0.00 $

Matt Black Aluminium coating has been designed to protect both product and nonmetal substrates.

Quantity: 2

sleeve material Aluminum - black velvet +134.65 $

Aluminum sheath coated with Black velvet Matt Ceramics. Matt Black Velvet, length 450-200mm, 2mm aluminum shell Our Ceramic coatings are temperature stable from 650°C, up to 1,100°C for the Black Velvet series. We process two high quality Ceramic formulations. The Ultra Performance Metallic Series. Temperature stable to over 650°C, Black Velvet offers very good corrosion protection, as well as optimum flexibility on all base materials. The Ultra Performance Satin Metallics are not comparable to conventional silicone products. Temperature stable up to over 1,100°C, our Ceramic Coatings are characterized by an optimal flex in combination with a hard and abrasion resistant surface. No calcification at constantly high operating temperatures, no cracking or detachment even at extreme temperature fluctuations. Properties Temperature stable up to over 1,100°C Excellent corrosion protection Optimum combination of flex and hardness Chemical resistant Very good thermal insulation / reduction of radiation temperature

Quantity: 2

sleeve material - carbon reinforced +116.69 $

Carbon: the super light material Carbon fiber reinforced plastic, also known as carbon fiber reinforced plastic (CFRP), also shortens carbon fiber, carbon or carbon, is a composite material in which carbon fibers are embedded in a plastic matrix. The matrix serves to connect the fibers and to fill the spaces between them. The material epoxy resin is usually chosen as the matrix. Carbon is only heat-resistant to a limited usage. * Speed Products has therefore developed thermal insulation that protects the carbon from the inside against the hot exhaust gases. We have christened this proprietary development RI Carbon: Reinforced Carbon. However, for reasons of durability and of course considerable weight advantages, carbon is only recommended for racing. For a durable use in normal road traffic there are better materials, such as the stainless steel( 0,7mm) developed by Speed Products, which is also very light. Note: Carbon is only conditionally heat resistant and loses its gloss with use. However, this does not affect the stability of the carbon material. Carbon might have different colour shades and nuances. * * No holders/brackets can be welded to carbon shells and carbon muffler shells. A super light and very durable alternative are Speed Products stainless steel shells in Mattblack Ceramics in 0.7mm wall thickness. * Carbon shells and carbon muffler shells cannot have laser logos on them. We use appropriate heat resistant decals/stickers and/or 3 D nameplates. For sizes, please refer to the corresponding options. Again, a super light and very durable alternative are Speed Products stainless steel sleeves in Mattblack Ceramics in 0.7mm wall thickness, on which the laser logo can be applied. For sizes, please refer to the corresponding options.

Quantity: 2

Please select only one component.

The muffler sleeve is available in different materials and finish, respectively.

sleeve aluminum, sleeve material/surface finish: brushed

sleeve material Aluminium - matt brushed 0.00 $

Quantity: 1

sleeve material/surface finish: Titanium Finish +89.75 $

Titanium Finish: is a design effect to give the stainless steel a Titanium structure and look. Titanium Works Finish takes on a unique coloring after it goes through a heat cycle on the motorcycle that looks much like those titanium works components. • Contemporary Satin/matte finish • Uniform heat coloration • Increased fatigue strength • Increased scratch and stain resistance Discolering might be possible under heat.

Quantity: 1

V2A stainless steel matt black +89.75 $

Matt Black Ceramic Coating has been designed to protect both metal and nonmetal substrates. Additionally, the Matt Black has been designed to withstand extreme use temperatures (800°C). This makes the coating ideal exhaust systems and components. Matt Black Ambient Cure Ceramic Coatings maintain excellent adhesion even after repeated thermal Cycling.

Quantity: 1

Please select only one component.

sleeve length 300mm 0.00 $

upgrade only

Quantity: 1

sleeve length 250mm +89.75 $

Quantity: 1

Please select only one component.

Hitzeschild Black Kawasaki Z 900 +89.75 $

Heat Shield Fits: Designed to fit both naked and faired models OEM headers and our own Race Headers Material : 304 Grade Black Stainless Steel Does not fit with stock heat shield.

Quantity: 1

no heatshield 0.00 $

Quantity: 1

heatshield - carbon Cobra Kawasaki Z 900 +107.71 $

Fits to stock cat box.

Quantity: 1

Finish configuration

Your configuration

excl. 19% VAT (will be charged for customer within the EU European Union).

Description

Notes & Exceptions:	*fairings Performance development/ additional performance/ information on performance development 50 State legal products 90-Day Limited Warranty
Remarks:	*18

Question about item

Additional contact mail (leave blank)*

I totally agree to receive nothing*

Contact data

E-Mail

Question about item

Your question